HCPL-4504 Datasheet, PDF (2/16 Pages) Agilent(Hewlett-Packard) – High CMR, High Speed Optocouplers

The HCPL-4504/0454 and
HCNW4504 CTR, propagation
delay, and CMR are specified for
both TTL and IPM load/drive
conditions. Specifications and
typical performance plots for both
TTL and IPM conditions are
provided for ease of application.
These single channel, diode-
transistor optocouplers are
available in 8-Pin DIP, SO-8, and
Widebody package configura-
tions. An insulating layer between
a LED and an integrated
photodetector provide electrical
insulation between input and
output. Separate connections for
the photodiode bias and output-
transistor collector increase the
speed up to a hundred times that
of a conventional phototransistor
coupler by reducing the base
collector capacitance.
Selection Guide
Single Channel Packages
8-Pin DIP
(300 Mil)
Small Outline
SO-8
HCPL-4504
HCPL-0454
Widebody
(400 Mil)
HCNW4504
Ordering Information
Specify Part Number followed by Option Number (if desired).
Example:
HCPL-4504#XXX
020 = UL 5000 V rms/1 Minute Option*
060 = VDE 0884 V_IORM = 630 V peak Option*
300 = Gull Wing Surface Mount Option†
500 = Tape and Reel Packaging Option
Option data sheets available. Contact your Hewlett-Packard sales representative or authorized distributor for
information.
*For HCPL-4504 only. Combination of Option 020 and Option 060 is not available.
†Gull wing surface mount option applies to through hole parts only.
Schematic
+ ^IF
ANODE
2
V_F
–
CATHODE
3
SHIELD
I_{CC 8}
V_CC
I_{O 6}
V_O
5
GND
1-34