HPMX-2006 Datasheet, PDF (1/8 Pages) Agilent(Hewlett-Packard) – 0.8 - 2.5 GHz Upconverter/Amplifier

0.8 – 2.5 GHz
Upconverter/Amplifier
Technical Data
HPMX-2006
Features
• Wide Band Operation
RF Output: 800 -2500 MHz
IF Input: DC- 900 MHz
• 2.7- 5.5 V Operation
• Mixer + Amplifier: 38 mA
Mixer only: 15 mA
Standby Mode: <40 µA
• Differential LO and High
Impedance IF Inputs
• -8.5 dBm Mixer and
+4.5␣ dBm Amplifier Output
Power at 1900 MHz
• JEDEC Standard SSOP-16
Surface Mount Package
Applications
• Cordless Handsets and Base
Stations
• Wireless Data Terminals
• Cellular/ PCS Handsets and
Base Stations
Package Pin Configuration
LO in 1
LO in 2
Ref 3
IF in 4
IF in 5
Amp Ve1 6
Amp RF in 7
enable 8
16 Mixer Vc
15 Gnd
14 Amp Vc
13 Amp RF Out
12 Amp Ve2
11 Amp 1 Ve2
10 Gnd 1
9 Mixer RF Out
Plastic SSOP-16
YYW20HW0P6MX
Description
The HPMX-2006 upconverter/
amplifier IC is designed to meet
the needs of cellular and PCS
telephone and wireless LAN
applications.
The IC consists of a Gilbert Cell
mixer optimized for upconversion
followed by a post-amplifier. The
mixer and amplifier are indepen-
dent allowing the insertion of a
sideband filter between the two.
Functional Block Diagram
IF INPUT ENABLE
LO
INPUT
AMP
OUTPUT
RF OUTPUT AMP INPUT
HPMX-2006
5966-0455E
7-66
The mixer is double balanced.
Both LO and IF inputs may be run
either single-endedly, or in
differential mode to reduce LO
leakage. LO inputs are matched
near 50 Ω; high impedance IF
inputs allow the mixer to be used
as a BPSK modulator. An inte-
grated transformer on the mixer
RF port creates a single-ended,
matched to 50 Ω output at
1900␣ MHz, and also reduces
common mode noise.