E7400A Datasheet, PDF (1/8 Pages) Agilent(Hewlett-Packard) – EMC Analyzers

Agilent
E7400A Series EMC Analyzers
Data Sheet
These specifications apply to the Agilent
Technologies E7402A and E7405A EMC
analyzers.
Frequency Specifications
Frequency range
E7402A
dc coupled
100 Hz¹ to 3.0 GHz
ac coupled
100 kHz¹ to 3.0 GHz
E7405A
Band LO harmonic = N
0 1- dc coupled 30 Hz¹ to 3.6 GHz
ac coupled 100 MHz to 3.6 GHz
1 1-
2.85 GHz to 6.7 GHz
2 2-
6.2 GHz to 13.2 GHz
3 4-
12.8 GHz to 19.2 GHz
4 4-
18.7 GHz to 26.5 GHz
Specifications
All specifications apply over 0 °C to +55 °C unless other-
wise noted and are covered by the product warranty. The
analyzer will meet its specifications when: it’s within the
one year calibration cycle, AUTO ALIGN [ALL] is selected,
stored a minimum 2 hours within the operating tempera-
ture range, turned on for at least 5 minutes, and Align
Now RF has been run once every 24 hour period. Typical per-
formance describes the level at which 80% of the units will
meet or exceed with a 95% confidence level over 20 to 30 °C,
but is not covered in the product warranty. Characteristics
describe expected product performance levels that are not
covered in the product warranty.
Frequency reference
Aging
Temperature stability
Settability
±1 x 10 ^–7/year
±1 x 10 ^–8
±1 x 10 ^–8
Frequency readout accuracy
(start, stop, center, marker) ±(frequency indication
x frequency reference error²
+ span accuracy + 15% of RBW
+ 10 Hz) + 1 Hz x N³
1. Usable to 30 Hz
2. Frequency reference error = (aging rate x period of time since
adjustment + settability + temperature stability)
3. N = LO harmonic mixing mode