HRF-SW1031 Datasheet, PDF (6/6 Pages) Honeywell Solid State Electronics Center – SP6T Absorptive RF Switch

HRF-SW1031
Evaluation Circuit Board
Preliminary
HRF-SW1031 Evaluation Board
Honeywell's evaluation board provides an
easy to use method of evaluating the RF
performance of our switch. Simply connect
power, DC and RF signals to be measuring
switch performance in less than 10
minutes.
Evaluation Circuit Board Layout Design Details
Item
PCB
Switch
Chip Capacitor
RF Connector
DC Pin
Description
Impedance Matched Multi-Layer FR4
HRF-SW1031 RF Switch
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
Mil-Max Model 800-10-064-10-001 Header Pins
Ordering Information
Ordering Number
Product
HRF-SW1031-B
HRF-SW1031-TR
Delivered In Chip Tubes
Delivered On Tape And Reel²
HRF-SW1031-E
Engineering Evaluation Board
(Note 2) Contact Honeywell for details
LPCC^TM is a registered Trademark of ASAT Ltd.
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any
license under its patent rights nor the rights of others.
________________________________________________________________________________________________________
Web Site:
www.mysoiservices.com
Honeywell
Email:
[e-mail]
Solid State Electronics Center
12001 State Highway 55
2002 1031W
Published June 2002 Page 6
Plymouth, Minnesota 55441-4799
1-800-323-8295