HRF-SW1031 Datasheet, PDF (1/6 Pages) Honeywell Solid State Electronics Center – SP6T Absorptive RF Switch

HRF-SW1031
SP6T Absorptive RF Switch
Features
• High Isolation Of > 40 dB @ 2 GHz
• Low Insertion Loss Of 1.9 dB @ 2 GHz
• DC To 3000 MHz Operating Frequency
• Integrated CMOS Control Logic
• Integrated ESD Protection on Digital I/O
• Single Positive Supply Voltage
• Ultra Small LPCC^TM Packaging
• Impedance matched to 75 Ohm systems
Product Description
The Honeywell HRF-SW1031 is a high performance
single pole six throw (SP6T) absorptive RF switch that
is ideal for use in wireless basestation and handset
applications that require minimum power and minimum
insertion loss.
The HRF-SW1031 is manufactured with Honeywell's
patented Silicon On Insulator (SOI) CMOS technology,
which provides the performance of GaAs with the
economy and integration capabilities of conventional
CMOS technology.
Preliminary
HRF-SW1031 in LPCC™ Package
RF Electrical Specifications @ + 25^oC
Results @ Vdd = 5.0 +/- 10%, Vss = 0 unless otherwise stated, Z0 = 75 ohms
Parameter
Test Condition
Frequency Minimum Typical
Insertion Loss
Isolation
VSW R*
1dB Compression
Input IP3
Trise, Tfall*
Ton, Toff
Transients
*By design
Input Power
Vss=Gnd
Vss= -3
Two-Tone Inputs Up To + 5 dBm
Vss= Gnd
Vss= -3
10% To 90%
50% Cntl To 90%/10%Rf
In-Band
DC – 1.0 GHz
2.0 GHz
3.0 GHz
DC – 1.0 GHz
2.0 GHz
3.0 GHz
DC – 0.5 GHz
0.5 – 2.0 GHz
2.0 – 3.0 GHz
1.0 GHz
1.0 GHz
2.0 GHz
2.0 GHz
1.7
1.9
2.4
54
41
33
1.1:1
1.4:1
1.9:1
19
28
35
>35
10
20
10
Maximum
2.1:1
Units
dB
dB
dB
dB
dB
dB
Ratio
Ratio
Ratio
dBm
dBm
dBm
dBm
nS
nS
mV
________________________________________________________________________________________________________
Web Site:
www.mysoiservices.com
Honeywell
Email:
[e-mail]
Solid State Electronics Center
12001 State Highway 55
2002 1031W
Published June 2002 Page 1
Plymouth, Minnesota 55441-4799
1-800-323-8295