103SR3F-5 Datasheet, PDF (6/17 Pages) Honeywell Accelerometers – Hall-effect Position Sensors with Sealed Housing

103SR Series
Table 3. Absolute Maximum Ratings*
Parameters
Supply Voltage (Vs)**
Voltage Externally Applied to Output
Output Current
Temperature Operate and Storage
4.5 Vdc to 24 Vdc
-1.0 Vdc to 25 Vdc
25 Vdc max. (OFF only)
-0.5 Vdc min. (ON or OFF)
20 mA max.
-40 °C to 100 °C [-40 °F to 212 °F]
*Absolute maximum ratings are the extreme limits that the device will withstand without damage to the device. Electrical and magnetic
characteristics are not guaranteed as the maximum limits (above recommended operating conditions) are approached, nor will the device
necessarily operate at absolute maximum rating
**Vs is the unregulated supply voltage
DIMENSIONAL DRAWINGS
Unipolar Digital Hall-effect Position Sensors
Figure 1. 103SR13A-1
Figure 2. 103SR13A-2
3 x 6,01 mm ±0,76 mm
[3 x 0.24 in ±0.03 in]
3 x 152,4 mm ±7,62 mm
[3 x 6.0 in ±0.30 in]
3X 24 gauge conductor
wire leads (individual wires)
15/32-32 UNS-2A
3 x 6,01 mm ±0,76 mm
[3 x 0.24 in ±0.03 in]
1000 mm ±7,62 mm
[40 in ±0.30 in]
3X 22 gauge conductor
cable
15/32-32 UNS-2A
25,4 mm ±1,02 mm
[1.0 in ±0.04 in]
2X hex nut
Sensitive area is located
1,27 mm [0.05 in] behind
the sensing face
Sensing face
MICRO
Catalog listing
Sensor will be
located anywhere within
0,64 mm [ 0.025 in]
Date code
25,4 mm ±1,02 mm
[1.0 in ±0.04 in]
2X hex nut
Sensitive area is located
1,27 mm [0.05 in] behind
the sensing face
Sensing face
MICRO
Catalog listing
Sensor will be
located anywhere within
1,27 mm [ 0.05 in]
Date code
6 ^{sensing.honeywell.com}