103SR3F-5 Datasheet, PDF (5/17 Pages) Honeywell Accelerometers – Hall-effect Position Sensors with Sealed Housing

Hall-effect Position Sensors with Sealed Housing
Table 1. Electrical and Magnetic Specifications - Digital Hall-effect Position Sensors (for reference only)
Catalog
Listing
Supply
Voltage
(Vdc)
Magnetic Characteristics [Gauss]* and Temperature °C [°F]
0 °C to 70 °C
[32 °F to 158 °F]
-40 °C to 100 °C
[-40 °F to 212 °F]
25 °C [77 °F]
Typical
103SR13A-1 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-2 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-3 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-4 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-6 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-8 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-9 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-10 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-11 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-12 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-13 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-14 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR13A-16 4.5 V to 24 V 10 Sink 0.4 20 Unipolar 475 135 40
103SR14A-1 4.5 V to 24 V 10 Sink 0.4 20 Unipolar -
-
-
103SR14A-2 4.5 V to 24 V 10 Sink 0.4 20 Unipolar -
-
-
103SR17A-1 4.5 V to 24 V 10 Sink 0.4 20 Latching 180 -180 80
103SR17A-2 4.5 V to 24 V 10 Sink 0.4 20 Latching 180 -180 80
103SR18-1 4.5 V to 24 V 10 Sink 0.4 20 Latching 90 -90 40
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
495 200 35
160 5
8
160 5
8
205 -205 35
205 -205 35
120 -120 40
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
350 275 75
85 58 27
85 58 27
100 -100 200
100 -100 200
50 -50 100
*Unipolar digital Hall-effect position sensor has a positive maximum operate point (South Pole) and a positive minimum release point. One magnetic
pole (South) is required to operate and release a unipolar digital Hall-effect position sensor
Latching digital Hall-effect position sensor is guaranteed to switch on with positive (South Pole) Gauss only, and switch off with negative (North Pole)
Gauss only
Ring magnets with alternating North and South Poles are usually used with latching digital Hall-effect position sensors
Table 2. Electrical and Magnetic Specifications - Linear Hall-effect Position Sensor (for reference only)
Catalog
Listing
Supply
Current
Supply
(mA Output
Voltage
max.) Type
(Vdc)
@ 25 °C
[77 °F]
Output
Voltage
Span (V)
Output
Magnetic Characteristics [Gauss]** and Temperature °C [°F]
Current
(mA max., Magnetic
sink or Type
-40 °C to 125 °C
[-40 °F to 257 °F]
25 °C [77 °F]**
25 °C [77 °F]**
source, Vs
>5 Vdc)
Max.
Linearity
Min. Linear
Measuring
Range [G]
Min. Typ. Max.
Sens. Sens. Sens.
[mV/G] [mV/G] [mV/G]
Min.
Null
[V]
Typ.
Null
[V]
Max.
Null
[V]
0.4 V to
Vs -0.4 V
4.5 V to
Push
103SR19A-1
10
(min.); 0.2 V 1
10.5 V
-Pull
to Vs -0.2 V
(typ.)
Linear -1.5 % ±600 3.031 3.125 3.219 2.425 2.500 2.575
**Refer to 103SR19A-1 engineering drawing for sensitivity and null drift vs temperature specifications
sensing.honeywell.com ₅