IL2418 Datasheet, PDF (2/4 Pages) List of Unclassifed Manufacturers – Telephone Tone Ringer with Bridge Diode

IL2418
MAXIMUM RATINGS^* (T_A = 25C)
Symbol
Parameter
Value
Unit
V_TP Calling Voltage (f = 50 Hz) Continuous
120
Vrms
V_TP Calling Voltage (f = 50 Hz) 5 Sec ON/10 Sec OFF
200
Vrms
I_CC Supply Current
22
mA
Tstg Storage and Junction Temperature
-60 to +125
C
* Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
These are stress ratings only and functional operation of the device at these or any other conditions beyond those
indicated under “recommended operating conditions” is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Symbol
V_CC
T_A
Parameter
Supply Voltage
Operating Temperature
Min
Max
Unit
26
V
-40
+70
C
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, V_IN and V_OUT should be constrained to the range GND(V_IN or
V_OUT)V_CC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or V_CC). Unused
outputs must be left open.
ELECTRICAL CHARACTERISTICS (T_A = 25C)
Symbol
Parameter
Test Conditions
I_CC
V_ON
V_ONR
V_SUS
R_D
V_OUT
I_OUT
Current Consumption without
Load
Activiation Voltage
Activiation Voltage Range
Sustaining Voltage
Differential Resistance in Off
Condition
Output Voltage Swing
Short Circuit Current
V_S=8.8 to 26 V
R_A = 1 K
V_TIP = 8.0 V
V_RING = 0 V
V_S = 26 V,
V_SRC = 8.0 V,
V_OFR = 8.0 V
V_S = 26 V
Guaranteed Limits
Unit
Min
Max
1.8
mA
12.2
13
V
8
10
V
8
8.8
V
6.4
3500
K
21
25.5
V
30
80
mA
2011, March, Rev. 01