HI-6137 Datasheet, PDF (1/230 Pages) Holt Integrated Circuits – 40 MHz SPI Host Interface

October, 2015
MAMBA^TM: HI-6137
3.3V BC / RT MIL-STD-1553 / MIL-STD-1760
Compact Multi-Terminal Device with SPI Host Interface
GENERAL DESCPIPTION
The 3.3V CMOS HI-6137 device is a member of
Holt’s MIL-STD-1553 MAMBA^TM family and provides
a complete single- or multi-function interface between
a host processor and MIL-STD-1553B bus. Each IC
contains a Bus Controller (BC) and a Remote Terminals
(RT). Any combination of the contained 1553 functions
can be enabled for concurrent operation. The enabled
terminals communicate with the MIL-STD-1553 buses
through a shared on-chip dual bus transceiver and
external transformers. The user allocates 16K bytes of
on-chip static RAM between devices to suit application
requirements.
The HI-6137 communicates with the host via a 40 MHz
4-wire serial peripheral interface (SPI). Programmable
interrupts provide terminal status to the host processor.
Circular data buffers in RAM have interrupts for rollover
and programmable “level attained”.
The HI-6137 can be configured for automatic self-
initialization after reset. A dedicated SPI port reads
data from an external serial EEPROM to fully configure
registers and RAM and optionally start execution for any
of the terminal devices.
• Built-in self-test for protocol logic, digital signal
paths and internal RAM.
• Optional self-initialization at reset uses external
serial EEPROM.
• ±8kV ESD Protection (HBM, all pins).
• Two temperature ranges: -40^oC to +85^oC, or
-55^oC to +125^oC with optional burn-in.
• RoHS compliant and Tin / Lead options available.
PIN CONFIGURATION (TOP)
MODE - 1
IRQ - 2
ACKIRQ - 3
MODE1760 - 4
READY - 5
VCC - 6
GND - 7
ACTIVE - 8
RTSSF - 9
AUTOEN - 10
TXINHA - 11
TXINHB - 12
HI-6137PCIF
HI-6137PCTF
HI-6137PCMF
36 - TTCLK
35 - ESCLK
34 - EECOPY
33 - ECS
32 - MOSI
31 - VCC
30 - GND
29 - MISO
28 -
27 - LOCK
26 - RTA4
25 - RTA3
FEATURES
• Concurrent multi-terminal operation for BC and/or
RT MIL-STD-1553B functions.
• 8K x 17-bit words internal static RAM with parity
• Autonomous terminal operation requires minimal
host intervention.
• 40 MHz SPI Host Interface.
• MIL-STD-1760 option sets Busy bit in Status
Word response during initialization.
• World’s smallest MIL-STD-1553 terminal, QFN
package measures just 6mm x 6mm.
• Fully programmable Bus Controller with 28 op
code instruction set.
• Independent 16-bit time tag counters and clock
sources for all modes. The Bus Controller also
has 32- and 48-bit time count options.
• 64-Word Interrupt Log Buffer queues the most
recent 32 interrupts. Hardware-assisted interrupt
decoding quickly identifies interrupt sources.
48 - Pin Plastic 6mm x 6mm
Chip-Scale Package (QFN)
See Section 24.1 on page 226 for 48-Pin PQFP Configuration
DS6137 Rev. A
HOLT INTEGRATED CIRCUITS
www.holtic.com
1
10/15