|
BC2102 Datasheet, PDF (1/15 Pages) Holtek Semiconductor Inc – Sub-1GHz OOK/FSK Transmitter | |||
|
BC2102
Sub-1GHz OOK/FSK Transmitter
Features
⢠Operating voltage:
â¦â¦ VDD=2.2V~3.6V@Ta= -40°C~+85°C
⢠Complete Sub-1GHz OOK/FSK transmitter
⢠Frequency bands: 315MHz, 433MHz, 868MHz,
915MHz
⢠Supports OOK/FSK modulation
⢠Supports 2-wire I2C interface
⢠Low sleep current
⢠TX current consumption@433MHz:
â¦â¦ 17mA (FSK, 10dBm)/11mA (OOK, 10dBm, 50%
duty cycle)
⢠Programmable symbol rate
⢠On-chip full range VCO and Fractional-N PLL
synthesizer
⢠Supports 16/24 MHz low cost crystal
⢠4-steps programmable TX Power: 0/5/10/13 dBm
⢠Fully integrated VCO, on chip loop filter and PLL
synthesizer
⢠Hardware control mode â MCU not required for
radio control
⢠Integrated 64Ã1-bit FUSE Data Memory
⢠Auto calibration function
⢠Package type: 8-pin SOP-EP
Abbreviation Notes
TX: RF Transmitter
SX: Synthesizer
XO: External Crystal
PA: Power Amplifier
OOK: On-Off Keying
FSK: Frequency Shift Keying
VCO: Voltage Control Oscillator
PLL: Phase Lock Loop
MMD: Multi-Mode Divider
XTAL: External Crystal
General Description
The BC2102 is a highly integrated OOK/FSK
transmitter for remote wireless applications. The
transmitter is a true "data-in, antenna-out" monolithic
device making it very easy for users to implement
wireless systems.
BC2102 offers a programmable output power level.
It is capable of delivering +13dBm maximum power
into a 50Ω load. The BC2102 adopts an agile state
machine to ease the control and minimize the power
consumption. With an external crystal and a few
external components, BC2102 can implement a
complete solution for an effective RF transmitter.
These features can be easily programmed through
I2C interface or internal Fuse. With these combined
features the BC2102 can provide a power-saving and
cost effective solution for a huge range of remote
wireless applications.
Rev. 1.00
1
December 21, 2016
|
▷ |