HMC754S8GE_10 Datasheet, PDF (9/10 Pages) Hittite Microwave Corporation – GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz

HMC754S8GE
v00.0409
GaAs HBT HIGH LINEARITY
PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz
Evaluation PCB - Standard and Option 2 Application
8
List of Materials for Evaluation PCB ^[1]
Item
Description
J1, J2
F-Connector
J3 - J6
DC PIN
C1 - C6
1 nF Capacitor, 0402 Pkg.
C7, C8
4.7 µF Capacitor, Tantalum, 0603 Pkg.
C9, C11
68 pF Capacitor, 0402 Pkg.
C10, C12
L1, L2 ^[2]
10 nF Capacitor, 0402 Pkg.
Inductor, 0603 Pkg.
R1, R2
T1, T2 ^[2]
0 Ohm Resistor, 0603 Pkg.
1:1 Transformer
U1
PCB ^[3]
HMC754S8GE Amplifier
124061 Evaluation PCB
[1] When requesting an evaluation board, please reference the
appropriate evaluation PCB number listed in the table “Components
for Selected Options.”
[2] Please refer to “Components for Selected Options” table for values
[3] Circuit Board Material: Rogers 4350 or Arlon 25FR
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 75 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
8-9
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]