HMC546MS8G Datasheet, PDF (9/12 Pages) Hittite Microwave Corporation – GaAs MMIC 10W T/R SWITCH 0.2 - 2.2 GHz

v02.0805
HMC546MS8G / 546MS8GE
GaAs MMIC 10W T/R SWITCH
0.2 - 2.2 GHz
14
Absolute Maximum Ratings
3V
5V
Max. Input Power
Tx Port 40 dBm 40 dBm
Rx Port 24 dBm 29 dBm
Max Channel Temp.
150 °C 150 °C
Thermal Resistance
Tx Port 54 °C/W 54 °C/W
Rx Port 68 °C/W 86 °C/W
Continuous Dissipated
Power
Tx Port 1.12 W
Rx Port 73 mW
1.12 W
232 mW
Supply Voltage (Vdd)
+10 Vdc
Control Voltage Range (Vctl)
-0.2 to Vdd + 1.0 Vdc
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Do not “hot switch” power levels greater than +24 dBm.
Outline Drawing
Truth Table
Control Input
Signal Path State
Vctl (Vdc)
RFC To Tx
RFC to Rx
0.0
OFF
ON
Vdd
ON
OFF
Vdd = +3.0V to +8.0V
Control Input Voltage Tolerances are ± 0.2 Vdc.
DC blocking capacitors are required at ports RFC, Tx and
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
14 - 314
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
HMC546MS8G
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC546MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H546
XXXX
H546
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com