HMC546MS8G Datasheet, PDF (12/12 Pages) Hittite Microwave Corporation – GaAs MMIC 10W T/R SWITCH 0.2 - 2.2 GHz

Evaluation PCB
v02.0805
HMC546MS8G / 546MS8GE
GaAs MMIC 10W T/R SWITCH
0.2 - 2.2 GHz
14
List of Materials for Evaluation PCB ^[1][4]
Item
Description
J1 - J3
PC Mount SMA RF Connector
J4 - J6
C1 - C3 ^[2]
L1 - L2 ^[2]
DC Pin
Capacitor, 0402 Pkg.
Inductor, 0402 Pkg.
U1
HMC546MS8G / HMC546MS8GE T/R Switch
PCB ^[3]
108992 Evaluation PCB
[1] DC blocking capacitors are not included
[2] Please refer to ‘Components for Selected Frequencies’ table
for values.
[3] Circuit Board Material: Rogers 4350
[4] When requesting an evaluation board, please reference
the appropriate evaluation PCB number listed in the table
“Components for Selected Frequencies.”
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and exposed paddle should be connected directly
to the ground plane similar to that shown above.
The evaluation circuit board shown above is avail-
able from Hittite Microwave Corporation upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
14 - 317