HMC696LP4E Datasheet, PDF (8/10 Pages) Hittite Microwave Corporation – SiGe WIDEBAND DIRECT QUADRATURE MODULATOR, 20 - 2700 MHz

Evaluation PCB
v00.0508
HMC696LP4E
SiGe WIDEBAND DIRECT QUADRATURE
MODULATOR, 20 - 2700 MHz
10
List of Materials for Evaluation PCB 121963 ^[1]
Item
J1 - J7
J8, J9
C1 - C3
C4, C5
C6, C7
R1
Description
PCB Mount SMA Connector
DC Molex Connector
0.1 μF Chip Capacitor, 0402 Pkg.
1000 pF Chip Capacitor, 0402 Pkg.
4.7 μF, Case A, Tantalum
14 Ohm Resistor, 0402 Pkg.
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
R2
0 Ohm Resistor, 0402 Pkg.
Hittite upon request.
U1
HMC696LP4E Modulator
PCB ^[2]
121961 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
10 - 73