HMC646LP2_09 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz

v02.1009
Evaluation PCB
HMC646LP2 / 646LP2E
GaAs MMIC 40W FAILSAFE
SWITCH, 0.1 - 2.1 GHz
11
List of Materials for Evaluation PCB ^[1]
Item
J1 - J3
J4 - J5
C1 - C7 ^[2]
L1 - L2 ^[2]
R1 ^[2]
U1
PCB ^[3]
Description
PCB Mount SMA RF Connector
2mm DC Header
Capacitor, 0402 Pkg.
Inductor, 0402 Pkg.
Resistor, 0402 Pkg.
HMC646LP2(E) T/R Switch
110780 Evaluation PCB
[1] When requesting an evaluation board, please reference
the appropriate evaluation PCB number listed in the table
“Components for Selected Frequencies.”
[2] Please refer to “Components for Selected Frequencies” table
for values.
[3] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and exposed paddle should be connected directly
to the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 223