HMC646LP2_09 Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – GaAs MMIC 40W FAILSAFE SWITCH, 0.1 - 2.1 GHz

v02.1009
Absolute Maximum Ratings
Max. CW Input Power
Max Channel Temp.
Thermal Resistance
Continuous Dissipated Power
Supply Voltage (Vdd)
Control Voltage Range (Vctl)
Storage Temperature
Operating Temperature
Vdd = 5V
Tx Port
Rx Port
+44.00 dBm
+36.75 dBm
150 °C
Tx Port
Rx Port
14.75 °C/W
14.75 °C/W
Tx Port
Rx Port
4.4 W
4.4 W
+10V Vdc
-0.2 to Vdd + 1.0 Vdc
-65 to +150 °C
-40 to +85 °C
11
Outline Drawing
HMC646LP2 / 646LP2E
GaAs MMIC 40W FAILSAFE
SWITCH, 0.1 - 2.1 GHz
Truth Table
Control Input
Signal Path State
Vctl
Vdd
RFC To Tx
RFC to Rx
0.0
0.0
ON
OFF
0.0
Vdd
OFF
ON
Vdd
Vdd
ON
OFF
Vdd = +3V to +8V
Control Input Voltage Tolerances are ± 0.2 Vdc.
DC blocking capacitors are required at ports RFC, Tx and Rx.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
11 - 220
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC646LP2
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC646LP2E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 3-Digit lot number XXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
646
XXX
646
XXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com