HMC633LC4 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC DRIVER AMPLIFIER, 5.5 - 17 GHz

v00.1107
Evaluation PCB
HMC633LC4
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 5.5 - 17 GHz
5
List of Materials for Evaluation PCB 115857 ^[1]
Item
Description
J1 - J2
2.92 mm PC Mount K-Connector
VD1 - VD4
DC Pin
C1 - C5
100 pF Capacitor, 0402 Pkg.
C6 - C10
1000 pF Capacitor, 0603 Pkg.
C11 - C15
2.2 μF Capacitor, Tantalum
U1
PCB ^[2]
HMC633LC4 Driver Amplifier
115855 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 167