HMC497LP4 Datasheet, PDF (8/10 Pages) Hittite Microwave Corporation – SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz

Evaluation PCB
v02.0506
HMC497LP4 / 497LP4E
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
9
List of Materials for Evaluation PCB 108962 ^[1]
Item
J1 - J7
J8, J9
C1 - C3
C4, C5
C6, C7
U1
PCB ^[2]
Description
PC Mount SMA Connector
DC Molex Connector
100 pF Chip Capacitor, 0402 Pkg.
1000 pF Chip Capacitor, 0402 Pkg.
4.7 uF, Case A, Tantulum
HMC497LP4 Modulator
108960 Eval Board
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of VIA holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
9 - 31