HMC497LP4 Datasheet, PDF (7/10 Pages) Hittite Microwave Corporation – SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz

v02.0506
HMC497LP4 / 497LP4E
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
9
Pin Descriptions
Pin Number
Function
1,6, 7, 13, 15
N/C
2, 5, 8, 11,
12, 14, 17, 19,
20, 23
GND
Description
Not connected.
These pins and the ground paddle should be
connected to a high quality RF/DC ground.
3, 4
LOP, LON
LO inputs. Need DC decoupling capacitors.
The ports could be driven single ended or differentially.
Interface Schematic
9, 10
QN, QP
Q channel differential baseband input. These high
impedance ports should be biased around 1.5V DC.
Nominal recommended baseband input is around
1.6V pp differential.
16
RFOUT
RF output. 50 Ohms. Needs DC coupling capacitor.
18
Vcc1
21, 22
IP, IN
Supply voltage for the mixer and
output stages 79mA @ +5.0V.
I channel differential baseband input.
These high impedence ports should be at the
same bias voltage (VbbDC) as Qn & Qp.
24
Vcc2
Supply voltage for the LO stage 88mA @ +5.0V.
9 - 30
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com