HMC496LP3_11 Datasheet, PDF (8/10 Pages) Hittite Microwave Corporation – SiGe WIDEBAND DIRECT MODULATOR RFIC, 4 - 7 GHz

Evaluation PCB
v05.0811
HMC496LP3 / 496LP3E
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 4 - 7 GHz
11
List of Materials for Evaluation PCB 107871 ^[1]
Item
J1 - J8
J9
C1, C2, C5, C6
C9
C3, C4, C7, C8
C15
U1
PCB ^[2]
Description
PCB Mount SMA Connector
DC Molex Connector
100 pF Chip Capacitor, 0402 Pkg.
10k pF Chip Capacitor, 0402 Pkg.
10 pF Chip Capacitor, 0402 Pkg.
4.7 uF, Case A, Tantulum
HMC496LP3 / HMC496LP3E Modulator
107309 Eval Board
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
11 - 8