HMC496LP3_11 Datasheet, PDF (6/10 Pages) Hittite Microwave Corporation – SiGe WIDEBAND DIRECT MODULATOR RFIC, 4 - 7 GHz

v05.0811
Absolute Maximum Ratings
Vcc
LO Input Power
Baseband Input Voltage
(Reference to GND)
Channel Temperature
Continuous Pdiss (T = 85°C)
(Derate 110 mW/°C above 85°C)
Thermal Resistance (R_th)
(junction to lead)
Storage Temperature
Operating Temperature
-0.5 to +6.0V
+10 dBm
-0.5 to +2.0V
150 °C
7 Watts
9 °C/Watt
-40 to +150 °C
-40 to +85 °C
Outline Drawing
HMC496LP3 / 496LP3E
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 4 - 7 GHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
11
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC496LP3
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC496LP3E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
100% matte Sn
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
496
XXXX
496
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
11 - 6