HMC495LP3 Datasheet, PDF (8/12 Pages) Hittite Microwave Corporation – SiGe WIDEBAND DIRECT MODULATOR RFIC, 250 - 3800 MHz

v02.0705
Absolute Maximum Ratings
Vcc1, Vcc2, VB1, VB2
-0.5 to +6V
LO Input Power
+10 dBm Max.
Baseband Input Voltage
(Reference to GND)
-0.5 to +1.8V
Channel Temperature
150 °C
Continuous Pdiss (T = 85°C)
2.83 Watts
(Derate 43.5 mW/°C above 85°C)
Thermal Resistance (R_th)
(junction to lead)
23 °C/Watt
Storage Temperature
-40 to +150 °C
Operating Temperature
-40 to +85 °C
Outline Drawing
HMC495LP3 / 495LP3E
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 250 - 3800 MHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
8
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC495LP3
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC495LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
495
XXXX
495
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8-9