HMC713MS8_09 Datasheet, PDF (7/10 Pages) Hittite Microwave Corporation – 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 100 - 2700 MHz

Pin Descriptions
Pin Number
Function
HMC713MS8 / 713MS8E
v05.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 100 - 2700 MHz
Description
Interface Schematic
12
1
INP
RF input pin.
Enable pin.
Apply VEN >0.8 x Vcc for normal operation.
Apply VEN <0.2xVcc to disable the HMC713MS8E and
2
EN
reduce supply current to 0.3mA.
To ensure proper start-up apply the power-up sequence
shown in the “Power-Up Timing Diagram” attached to
the application circuit.
Set point input for controller mode.
3
VSET
Connect to OUT with the resistor network shown in
evaluation board drawing for detector mode.
4
CLPF
Connection for ground referenced external lowpass
filter capacitor.
5
GND
Device ground.
12 - 122
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com