HMC684LP4 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – BiCMOS MMIC MIXER W/ INTEGRATED BiCMOS MMIC MIXER W/ INTEGRATED

Evaluation PCB
8
v01.0408
HMC684LP4 / 684LP4E
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 700 - 1000 MHz
8 - 240
List of Materials for Evaluation PCB 119920 ^[1]
Item
J1 - J3
J4 - J7
C1, C19
C4
C7, C8
C10, C12, C16, C18
C11, C15, C17, C21
C20
Description
SMA Connector
DC Pin
22 pF Capacitor, 0402 Pkg.
6.8 pF Capacitor, 0402 Pkg.
10 nF Capacitor, 0402 Pkg.
1 nF Capacitor, 0402 Pkg.
0.1 μF Capacitor, 0603 Pkg.
4.7 μF Case A, Tantalum
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
R2 - R4
0 Ohm Resistor, 0402 Pkg.
R5
68 Ohm Resistor, 0402 Pkg.
R9
390 Ohm Resistor, 0603 Pkg.
T1
1:1 Transformer - Tyco MABACT0039
U1
HMC684LP4(E) Downconverter
PCB ^[2]
118162 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25R, FR4
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com