HMC643LC5 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 9 - 12 GHz

v00.0607
Evaluation PCB
7
HMC643LC5
GaAs MMIC 6-BIT DIGITAL
PHASE SHIFTER, 9 - 12 GHz
List of Materials for Evaluation PCB 117252 ^[1][3]
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J4
Molex Header 2mm
U1
PCB ^[2]
HMC643LC5 6-Bit Digital Phase Shifter
117186 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[3] Please refer to part’s pin description and functional diagram for
pin out assignments on evaluation board.
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
7 - 30
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com