HMC643LC5 Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 9 - 12 GHz

v00.0607
HMC643LC5
GaAs MMIC 6-BIT DIGITAL
PHASE SHIFTER, 9 - 12 GHz
7
Pin Descriptions
Pin Number
Function
1 - 4,
N/C
21 - 32
5, 7, 18, 20
GND
Description
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
These pins and exposed ground paddle
must be connected to RF/DC ground.
6
9, 10, 11,
12, 14, 17
8, 13,
15, 16
19
RFIN
BIT5, BIT1, BIT2,
BIT3, BIT4, BIT6
BIT5, BIT3
BIT4, BIT6
RFOUT
This port is DC coupled and matched to 50 Ohms.
Non-Inverted Control Input. See truth table
and control voltage tables.
Inverted Control Input. See truth table
and control voltage tables.
This port is DC coupled and matched to 50 Ohms.
Interface Schematic
Outline Drawing
7 - 28
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER
50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
7. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com