HMC581LP6_09 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – HIGH IP3 RFIC DUAL DOWNCONVERTER, 800 - 960 MHz

Evaluation PCB
8
v00.0806
HMC581LP6 / 581LP6E
HIGH IP3 RFIC DUAL
DOWNCONVERTER, 800 - 960 MHz
8 - 190
List of Materials for Evaluation PCB 115316 ^[1]
Item
J1 - J5
J6 - J9
C1, C4 - C10
C2, C3
C11, C12, C13
L1, L2
L3
L4, L5
Description
PCB Mount SMA RF Connector
DC Pins
1000 pF Chip Capacitor, 0402 Pkg.
7 pF Chip Capacitor, 0402 Pkg.
100 pF Chip Capacitor, 0402 Pkg.
220 nH Chip Inductor, 0603 Pkg.
22 nH Chip Inductor, 0603 Pkg.
27 nH Chip Inductor, 0603 Pkg.
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
R1, R2
4.7 Ohm Resistor, 0603 Pkg.
R3
22 Ohm Resistor, 0603 Pkg.
U1
HMC581LP6 / HMC581LP6E
PCB ^[2]
106955-2 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com