HMC581LP6_09 Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – HIGH IP3 RFIC DUAL DOWNCONVERTER, 800 - 960 MHz

v00.0806
8
Absolute Maximum Ratings
RF / IF Input (Vdd= +5V)
LO Drive (Vdd= +5V)
Vdd (LO or IF)
Channel Temperature
Continuous Pdiss (T = 85°C)
(derate 25.5 mW/°C above 85°C)
Thermal Resistance
(channel to ground paddle)
Storage Temperature
Operating Temperature
+13 dBm
+15 dBm
+7 Vdc
150°C
1.64 W
39.6 °C/W
-65 to +150°C
-40 to +85°C
Outline Drawing
HMC581LP6 / 581LP6E
HIGH IP3 RFIC DUAL
DOWNCONVERTER, 800 - 960 MHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
8 - 188
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
HMC581LP6
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC581LP6E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H581
XXXX
H581
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com