HMC500LP3 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs HBT VECTOR MODULATOR 1.8 - 2.2 GHz

v01.0705
Evaluation PCB
HMC500LP3 / 500LP3E
GaAs HBT VECTOR
MODULATOR 1.8 - 2.2 GHz
13
List of Materials for Evaluation PCB 106395 ^[1]
Item
J1 - J4
J5
C1
C2 - C5
T1
L1
U1
Description
PCB Mount SMA Connector
2 mm DC Header
4.7 μF Capacitor, Tantalum
1 nF Capacitor, 0402 Pkg.
Balun, 1206 Pkg.
330 nH Inductor, 0805 Pkg.
HMC500LP3 / HMC500LP3E
Vector Modulator
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of VIA holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
PCB ^[2]
106388 Evaluation PCB
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluaiton PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
13 - 40
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com