HMC500LP3 Datasheet, PDF (4/8 Pages) Hittite Microwave Corporation – GaAs HBT VECTOR MODULATOR 1.8 - 2.2 GHz

v01.0705
HMC500LP3 / 500LP3E
GaAs HBT VECTOR
MODULATOR 1.8 - 2.2 GHz
Typical Supply Current vs. Vcc
Vcc (V)
7.6
8.0
8.4
Icc (mA)
85
90
95
Note:
Modulator will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Absolute Maximum Ratings
RF Input (Vcc = +8V)
Supply Voltage (Vcc)
I & Q Input
27 dBm
+10V
-0.5V to +5.0V
Channel Temperature (Tc)
135 °C
Continuous Pdiss (T = 85°C)
(Derate 25 mW/°C above 85°C)
Thermal Resistance (R_th)
(junction to ground paddle)
Storage Temperature
1.25 W
40 °C/W
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Outline Drawing
13
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.
Package Information
Part Number
HMC500LP3
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC500LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
500
XXXX
500
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
13 - 37