HMC420QS16 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – CELLULAR RFIC DOWNCONVERTER, 0.7 - 1.0 GHz

v01.1102
MICROWAVE CORPORATION
HMC420QS16
CELLULAR RFIC
DOWNCONVERTER, 0.7 - 1.0 GHz
Evaluation PCB
12
List of Material
Item
Description
J1 - J3
PC Mount SMA RF Connector
J4 - J6
DC Pins
C1
1000 pF Chip Capacitor, 0603 Pkg.
C2, C3, C4
0.01µF Chip Capacitor, 0603 Pkg.
C5
33 pF Chip Capacitor, 0402 Pkg.
C6 **
12 pF Chip Capacitor, 0603 Pkg.
L1
330 nH Chip Inductor, 0805 Pkg.
L2 **
150 nH Chip Inductor, 0805
L3
6.8 nH Inductor, 0805 Pkg.
R1
6.8 Ohm Resistor, 0603
U1
HMC420QS16 Mixer
PCB*
105897 Evaluation Board, 1.100” x 1.100”
* Circuit Board Material: Rogers 4350
** For 120 MHz IF. See Application Circuit for alternate IF frequency tuning.
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads should be connected
directly to the ground plane similar to that shown.
A sufficient number of VIA holes should be used
to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Hittite upon request.
12 - 248
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com