HMC420QS16 Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – CELLULAR RFIC DOWNCONVERTER, 0.7 - 1.0 GHz

v01.1102
MICROWAVE CORPORATION
HMC420QS16
CELLULAR RFIC
DOWNCONVERTER, 0.7 - 1.0 GHz
12
MxN Spurious @ IF Port
nLO
mRF
0
1
2
3
0
xx
41
89
66
1
62
0
64
>113
2
>113
102
51
82
3
>113
>113
>113
71
4
>113
>113
>113
>113
RF Freq.= 0.92 GHz @ -10 dBm
LO Freq.= 0.8 GHz @ 0 dBm
All values in dBc relative to the IF power level.
4
75
103
>113
>113
>113
Absolute Maximum Ratings
RF / IF Input (Vdd= +5V)
LO Drive (Vdd= +5V)
Vdd (LO or IF)
Channel Temperature
Continuous Pdiss (T = 85°C)
(derate 6.34 mW/°C above 85°C)
Storage Temperature
Operating Temperature
+13 dBm
+15 dBm
+7 Vdc
150°C
0.41 W
-65 to +150 °C
-40 to +85 deg °C
Outline Drawing
Harmonics of LO
nLO Spur @ RF Port
LO Freq. (GHz)
1
2
3
4
0.55
21
14
50
45
0.65
18
12
48
43
0.75
22
15
42
38
0.85
27
20
40
46
0.95
28
26
44
57
1.05
27
31
54
66
LO= 0 dBm
Values in dBc below input LO level measured at RF port.
Typical Supply Current vs. Vdd
Vdd (Vdc)
Idd (mA)
4.5
51
5.0
52
5.5
53
Note: Mixer will operate over full voltage range shown above.
12 - 246
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
3. LEADFRAME PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com