HMC739LP4 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-16, 23.8 - 26.8 GHz

Evaluation PCB
HMC739LP4 / 739LP4E
v03.0309
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-16, 23.8 - 26.8 GHz
8
List of Materials for Evaluation PCB 112261 ^[1]
Item
J1 - J2
J3
J4
J5, J6
C1
C2, C3
C4, C5
U1
Description
PCB Mount SMA Connector
PCB Mount K-Connector
PCB Mount SRI SMA Connector
2mm SMT 8 Pin Molex Header
1000 pF, 0402 Pkg.
100 pF, 0402 Pkg.
4.7 µF Tantalum Capacitors Case A
HMC739LP4(E) VCO
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation circuit board shown is avail-
able from Hittite upon request.
PCB ^[2]
112259 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
8-6