HMC709LC5_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q UPCONVERTER 11 - 17 GHz

v04.0110
Evaluation PCB
HMC709LC5
GaAs MMIC I/Q UPCONVERTER
11 - 17 GHz
9
List of Materials for Evaluation PCB 120408 ^[1]
Item
J1, J2
J3, J4
J5 - J8
C1, C2
C3, C4
C5, C6
U1
PCB ^[2]
Description
PCB Mount SMA Connector
PCB Mount SMA SRI Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
2.2 µF Tantalum Capacitor Case A
HMC709LC5 Upconverter
123310 Evaluation Board
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR, FR4
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
9-6