HMC709LC5_10 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q UPCONVERTER 11 - 17 GHz

v04.0110
HMC709LC5
GaAs MMIC I/Q UPCONVERTER
11 - 17 GHz
9
Pin Descriptions
Pin Number
1 - 6, 8, 12 - 19,
22 - 25, 27, 28
Function
N/C
Description
No Connection required. These pins may be connected
to RF/DC ground without affecting performance.
7
Vdd1
Power supply voltage for LO Amplifier. See application
circuit for required external components.
9, 11, 20,
30, 32
10
21
26
29
31
GND
LOIN
RFOUT
Vdd2
IF1
IF2
Package bottom must be connected to RF/DC ground.
This pin is AC coupled
and matched to 50 Ohms.
This pin is AC coupled
and matched to 50 Ohms.
Power supply voltage for RF amplifier. See application
circuit for required external components.
Differential IF input pins. For applications not requiring
operation to DC, an off chip DC blocking capacitor
should be used. For operation to DC this pin must not
source/sink more than 3mA of current or part non-
function and possible part failure will result.
Application Circuit
Interface Schematic
9-5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]