HMC705LP4 Datasheet, PDF (6/12 Pages) Hittite Microwave Corporation – 6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)

v03.0709
Absolute Maximum Ratings
RF Input (Vcc= +5V)
Supply Voltage (Vcc)
Logic Inputs
Junction Temperature (Tc)
Continuous Pdiss (T = 85 °C)
(derate 49 mW/° C above 85 °C)
Thermal Resistance
(Junction to ground paddle)
Storage Temperature
Operating Temperature
+13 dBm
+5.5V
-0.5V to (0.5V + Vcc)
135 °C
2.4 W
20.5 °C/W
-65 to +150 °C
-40 to +85 °C
Outline Drawing
HMC705LP4 / 705LP4E
6.5 GHz PROGRAMMABLE
DIVIDER (N = 1 - 17)
Typical Supply Current vs. Vcc
Vcc (V)
4.75
Icc (mA)
4
180
5.00
190
5.25
210
Note: HMC705LP4E will work over full voltage range above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.
Part Number
HMC705LP4
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC705LP4E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
100% matte Sn
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H705
XXXX
H705
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
4-6