HMC705LP4 Datasheet, PDF (10/12 Pages) Hittite Microwave Corporation – 6.5 GHz PROGRAMMABLE DIVIDER (N = 1 - 17)

v03.0709
Evaluation PCB
HMC705LP4 / 705LP4E
6.5 GHz PROGRAMMABLE
DIVIDER (N = 1 - 17)
4
List of Materials for
Evaluation PCB 116993 ^[1]
Item
Description
J1 - J4
PCB Mount SMA Connector
J5
14 Position Header
J6
4 Position Header
R1
10K Ohm Resistor Network, Bissel SMD
C1, C2
1000 pF Capacitor, 0402 Pkg.
C3 - C5
100 pF Capacitor, 0402 Pkg.
C6 - C8
1000 pF Capacitor, 0603 Pkg.
C9
4.7 μF Tantalum Capacitor, Case A
U1
PCB ^[2]
HMC705LP4(E) Programmable Divider
116991 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads
and backside ground paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
4 - 10