HMC641LC4_09 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz

Evaluation PCB
v00.0609
HMC641LC4
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 20 GHz
11
List of Materials for Evaluation PCB 126511 ^[1]
Item
Description
J1 - J5
PCB Mount SMA Connector
C1
1000 pF Capacitor, 0402 Pkg.
U1
PCB ^[2]
HMC641LC4 Switch
126508 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon FR4
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 215