HMC641LC4_09 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz

v00.0609
HMC641LC4
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 20 GHz
Pin Descriptions
Pin Number
Function
1, 5, 6, 13, 18
N/C
2, 4, 7, 9, 10, 12,
17, 19, 21, 22, 24
Ground Paddle
3, 8, 11, 20, 23
GND
RFC, RF1, RF2,
RF3, RF4
Description
These pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
These pins and the exposed ground paddle
must be connected to RF/DC ground.
These pads are DC coupled and matched to
50 Ohms. Blocking capacitors are required if
RF line potential is not equal to 0V.
14
Vss
Supply Voltage -5 Vdc ± 10%.
11
15
CTLB
16
CTLA
See Truth Table and Control Voltage Table.
See Truth Table and Control Voltage Table.
Interface Schematic
11 - 214
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com