HMC603MS10_08 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz

HMC603MS10 / 603MS10E
v00.0905
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
5
Evaluation Circuit Board
* R2 - R6= 100 Ohm.
These resistors are optional
and may be used to enhance
decoupling of the RF path
from the control inputs.
List of Materials for Evaluation PCB 112747 ^[1]
Item
J1 - J2
J3 - J8
R1
R2 - R6
C1 - C2
U1
Description
PCB Mount SMA Connector
DC Pin
5k Ohm Resistor, 0402 Pkg.
100 Ohm Resistor, 0402 Pkg.
0402 Chip Capacitor, Select Value for Lowest
Frequency
HMC603MS10 / HMC603MS10E
Digital Attenuators
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
PCB ^[2]
112746 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 195