HMC603MS10_08 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz

HMC603MS10 / 603MS10E
v00.0905
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
5
Worst Case Step Error
0.6
0.5
0.4
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
Truth Table
V1
8 dB
Control Voltage Input
V2
4 dB
V3
2 dB
V4
1 dB
V5
0.5 dB
Attenuation
State
RF1 - RF2
High High High High High Reference I.L.
High High High High
Low
0.5 dB
High High High Low
High
1 dB
High High Low High High
2 dB
High Low High High High
4 dB
Low High High High High
8 dB
Low Low Low Low
Low
15.5 dB
Max. Atten.
Any combination of the above states will provide an attenuation
approximately equal to the sum of the bits selected.
Bias Voltage & Current
Vdd = +5.0 Vdc ± 10%
Vdd
(VDC)
Idd (Typ.)
(µA)
+3.0
4.0
+5.0
5.0
Control & Bias Voltages
State
Bias Condition
Low
0 to +0.2V @ 1.0 µA Max.
High
Vdd ± 0.2V @ 0.5 µA Max.
Note: Vdd = +3V to +5V ± 0.2V
0.00.20.2
Application Circuit
5 - 192
Note:
DC Blocking Capacitors C1 & C2 are required on RF1
& RF2. Choose C1 = C2 = 100 ~ 300 pF to allow lowest
customer specific frequency to pass with minimal loss.
R1= 5K Ohm is required to supply voltage to the circuit
through either Pin 6 or Pin 10.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com