HMC594LC3B Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC LOW NOISE AMPLIFIER, 2 - 4 GHz

v00.0307
Evaluation PCB
HMC594LC3B
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 2 - 4 GHz
5
List of Materials for Evaluation PCB 109712 ^[1]
Item
Description
J1 - J2
SRI SMA Connector
J3 - J6
DC Pin
C1 - C2
100 pF Capacitor, 0402 Pkg.
C3 - C4
1000 pF Capacitor, 0603 Pkg.
C5 - C6
2.2 μF Capacitor, Tantalum
U1
HMC594LC3B Amplifier
PCB ^[2]
109710 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 619