HMC538LP4 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – 600° ANALOG PHASE SHIFTER, 6 - 15 GHz

v00.0505
Evaluation PCB
HMC538LP4 / 538LP4E
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
14
List of Material for Evaluation PCB 108812 ^[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
U1
PCB ^[2]
HMC538LP4 / HMC538LP4E
Analog Phase Shifter
111296 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar to
that shown. A sufficient number of VIA holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
14 - 293