HMC538LP4 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – 600° ANALOG PHASE SHIFTER, 6 - 15 GHz

v00.0505
Outline Drawing
HMC538LP4 / 538LP4E
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
14
Package Information
Part Number
Package Body Material
HMC538LP4
Low Stress Injection Molded Plastic
HMC538LP4E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Lead Finish
Sn/Pb Solder
100% matte Sn
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H538
XXXX
H538
XXXX
Pin Descriptions
Pin Number
1, 2, 4-15,
17-20, 22-24
Function
N/C
3
RFIN
16
RFOUT
Description
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
Port is DC blocked.
Port is DC blocked.
Interface Schematic
Phase shift control pin. Application of a voltage between 0 and 5 volts causes
21
Vctl
the transmission phase to change. The DC equivalent circuit is a series con-
nected diode and resistor.
14 - 292
GND
Ground: Backside of package has exposed metal ground slug that must be
connected to ground thru a short path. Vias under the device are required.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com