HMC479MP86_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz

Evaluation PCB
v03.0810
HMC479MP86 / 479MP86E
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
8
List of Materials for Evaluation PCB 107489 ^[1]
Item
J1 - J2
J3 - J4
C1, C2
C3
C4
C5
R1
L1
U1
Description
PCB Mount SMA Connector
DC Pin
Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
Resistor, 1210 Pkg.
Inductor, 0603 Pkg.
HMC479MP86 / HMC479MP86E
The circuit board used in the application should
use RF circuit design techniques. Signal lines sho-
uld have 50 Ohm impedance while the package
ground leads should be connected directly to the
ground plane similar to that shown. A sufficient
number of via holes should be used to connect
the top and bottom ground planes. The evaluation
board should be mounted to an appropriate heat
sink. The evaluation circuit board shown is available
from Hittite upon request.
PCB ^[2]
107087 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
8-6