HMC455LP3_06 Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – InGaP HBT ½ Watt High IP3 AMPLIFIER, 1.7 - 2.5 GHz

Pin Descriptions
Pin Number
1, 2, 4 - 9,
11 - 16
Function
N/C
3
RFIN
10
RFOUT
v02.0605
HMC455LP3 / 455LP3E
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
5
Description
This pin may be connected to RF ground.
This pin is AC coupled.
An off chip series matching capacitor is required.
RF output and DC Bias for the output stage.
Interface Schematic
GND
Package bottom must be connected to RF/DC ground.
Application Circuit
TL1
TL2
Impedance
50 Ohm 50 Ohm
Physical Length
0.33”
0.18”
Electrical Length
34°
19°
PCB Material: 10 mil Rogers 4350, Er = 3.48
TL3
50 Ohm
0.13”
13.5°
TL4
50 Ohm
0.04”
4°
Recommended Component Values
L1
8.2 nH
C1
2.2 μF
C2, C3
3.0 pF
C4
0.9 pF
C5
100 pF
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 357