HMC451LP3 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 5 - 18 GHz

Evaluation PCB
v00.0808
HMC451LP3 / 451LP3E
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 5 - 18 GHz
9
List of Materials for Evaluation PCB 120202 ^[1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J5
DC Pin
C1, C2
100 pF Capacitor, 0402 Pkg.
C3, C4
1000 pF Capacitor, 0603 Pkg.
C5, C6
2.2 µF Capacitor, Tantalum
U1
PCB ^[2]
HMC451LP3(E) Amplifier
120201 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
9-6