HMC451LP3 Datasheet, PDF (4/6 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 5 - 18 GHz

v00.0808
Absolute Maximum Ratings
Drain Bias Voltage (Vdd₁ = Vdd₂)
RF Input Power (RFIN)(Vdd = +5Vdc)
Channel Temperature
Continuous Pdiss (T = 85 °C)
(derate 12.8 mW/°C above 85 °C)
Thermal Resistance
(channel to ground paddle)
Storage Temperature
Operating Temperature
+5.5V
+10 dBm
150 °C
0.83 W
78 °C/W
-65 to +150 °C
-40 to +85 °C
Outline Drawing
HMC451LP3 / 451LP3E
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 5 - 18 GHz
Typical Supply Current vs. Vdd₁ = Vdd₂
Vdd₁ = Vdd₂ (V)
+4.5
Idd₁ + Idd₂ (mA)
120
+5.0
122
+5.5
124
Note: Amplifier will operate over full voltage range shown above
9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
HMC451LP3
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC451LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
451
XXXX
451
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
9-4