HMC441LC3B Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 6 - 18 GHz

Evaluation PCB
v00.1104
HMC441LC3B
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 6 - 18 GHz
8
List of Material for Evaluation PCB 109712*
Item
Description
J1 - J2
PC Mount SMA Connector
J3 - J4
DC Pin
C1
100 pF Capacitor, 0402 Pkg.
C2
1000 pF Capacitor, 0603 Pkg.
C3
2.2 µF Capacitor, Tantalum
U1
HMC441LC3B Amplifier
PCB*
109710 Evaluation PCB, 10 mils
** Circuit Board Material: Rogers 4350
** Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of VIA holes should be used to con-
nect the top and bottom ground planes. The evaluation
board should be mounted to an appropriate heat sink.
The evaluation circuit board shown is available from
Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8 - 205