HMC433_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 8 GHz

v04.0410
Evaluation PCB
HMC433 / 433E
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 8 GHz
4
List of Materials for Evaluation PCB 105675 ^[1]
Item
J1 - J2
J3 - J4
C1 - C2
C3
C4
U1
PCB ^[2]
Description
PCB Mount SMA RF Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.
10 μF Tantalum Capacitor, 1206 Pkg.
HMC433 / HMC433E Divide-by-4
105199 Eval Board
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
4 - 77